Aquatich 40

Enquire

SPECIFICATION

'NEW' AQUATICH 40 designed by Humphrey Yacht Design
Built by Ocean Tec, Slovenia 2018

Built to a “luxury racer” finish in carbon / glass / Vinylester infusion throughout. Includes comprehensive specification and Pauger Carbon Mast and Boom. Further deck layout, specification, ORC / IRC optimisation and interior customization are possible at this stage. Excludes sail wardrobe package 

Cruiser Racer: ORC GPH 545; IRC (provisional) 1.158

HULL LENGTH:  12.20 m / 40'
LWL:                   11.00 m / 36' 08"
BEAM:                  3.80 m / 12' 4"
DRAFT:                2.55 m / 8' 3"

Displacement: 5700 ‐ 5920 kg (depending on IRC/ORC configuration)
Ballast: 3080 ‐ 3300 kg (depending on IRC/ORC configuration)

Sail areas:
Mainsail area: 55 m²
Headsail area: 42 m²
Gennaker area: 170 m²

Construction:
Vinylester infused PVC core sandwich, Carbon and E‐glass reinforcements.
Bulkheads and longitudinal structure vinylester infused PVC core sandwich, Carbon and E‐glass reinforcements.
White gel coat finish outside, 2‐part PU paint sprayed inside.
Non‐skid finish on horizontal deck surfaces and sole boards.

Interior general:
Forward cabin with double berth, W.C. / washroom / shower and large wet locker fwd of mast bulkhead.
Saloon area with settees, table and overhead lockers. Settees with folding backrests to form sea berths.
L-shaped galley to starboard with double sink, cooker oven and ice box.
Dedicated navigation table to port.
Two double aft quarter‐berths with storage lockers.
All interior units are moulded from foam cored E‐glass sandwich panels with a polished gelcoat finish and solid hardwood fiddles.
Cabin sole boards from foam cored E‐glass sandwich panels.
Berth for every member of the crew when in port (i.e.10), designed to sleep 6 in comfort when cruising and up to 4 to windward offshore.

Keel:
2.55m draft 770 kg SG iron fin with 2630kg lead bulb T‐ keel, faired to racing finish.

Rudder and steering:
Jefa twin wheel steering system.
Single carbon fibre rudder stock and blade.

Deck:
Mainsheet 2 x Harken Performa 46.2 winch.
Primary 2 x Harken Performa 46.2 winch.
Pit 2 x Harken Performa 40.2 winch.
Harken 2:1 Mainsheet system to dedicated winches, track and traveller.
Transverse jib sheet track with 5‐10 degrees sheeting angle, outboard leads.
Spinlock Clutches.
Lewmar hatches and portlights.
Composite sliding companionway hatch and washboard.
Constrictor rope clutch for reef lines inside the boom.

Mast and Rig:
Pauger Carbon Mast, boom and spreaders.
Rod rigging.
Removable carbon bow sprit 1.7m.
Running rigging Gottifredi Maffioli, spliced.

Plumbing:
2 x manual bilge pump, ORC compliant.
1 x Automatic Electrical bilge / shower pump.
100l flexible water tank with deck fill
Flush mounted seacocks.
Marine toilet.
22L hot water calorifier.
Electric pressure pump for hot and cold running water to galley and heads.

Machinery:
Engine Yanmar 3YM30C.
Saildrive SD25.
Alternator 12V;125A.
2‐blade Flexofold race propeller.
Removable engine box with 20mm sound proofing.
Yanmar B‐20 engine control panel.
Single lever Morse control in cockpit.
Fuel tank 80l with deck filler.

Electrical:
65 Ah engine start battery.
2 x 100 Ah Consumers battery.
12V electrical panel with switches.
Battery monitoring display.
LED navigation lights.
LED interior lightning.

 

 

 

Disclaimer

The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.